Friends, hello everyone! Today I will show you how to solve one of the most common problems associated with refrigerators, namely, water accumulation under the vegetable drawers. This unpleasantness is familiar to many: you open the refrigerator, and there is water below. Let's figure out why this happens and how to deal with it.
If you do not want to do it yourself, it is better to order home appliance repair in Oakville from A-Repair specialists - professionals will cope with any problem quickly and reliably.
Why does water accumulate?
The reason usually lies in a clogged drain hole. Condensation, which should flow through this hole into a tube and then into a tray at the bottom of the refrigerator, cannot pass if the hole or tube is clogged. As a result, water overflows and accumulates under the drawers.
Before removing the blockage, be sure to clean the drawers from water and mold, and if you have trays with rollers, disassemble them and wash them.
How to remove the blockage?
Method 1: Cleaning with a brush
Take a special long brush for cleaning refrigerators. These are sold in sets.
Clean the drain hole and tube.
As a check, you can pour some hot water into the hole - if the water drains without problems, then the blockage is cleared.
Caution! Using cotton swabs is effective only for cleaning the hole itself. If the blockage is deeper in the tube, this method will not help.
Method 2: Cleaning from the back of the refrigerator
Pull out the refrigerator by unscrewing the condenser grill. In the Liebherr example, these are 6 screws.
Carefully provide access to the tube. For safety, use ties to fix the condenser.
Clean the tube with a flexible brush or wire. You can attach a piece of foam rubber to the end of the wire to avoid damaging the tube.
After cleaning, check the tray: sometimes dirt and grease accumulate in it. If you own a Liebherr, be prepared that it may be difficult to remove the tray without removing the compressor.
Final stage
After removing the blockage, pour hot water into the hole using a syringe with a flexible tube (for example, from a dropper). This will help to completely flush the system. Then check how the water drains and reassemble the refrigerator.
Result
Now your refrigerator is working as it should again! If you do not have the time or desire to deal with this yourself, contact the specialists at A-Repair. They will perform high-quality repair of household appliances in Oakville, and you will get rid of unnecessary hassle.
For additional information and useful tips, read our article: "
Appliance Repair Oakville ". There you will find even more recommendations on how to keep your appliances in perfect condition.
If this guide helped you, like it and share your results! 😊
